+54 9 1139100307

+54 113221 4302

ventas@fixtools.com.ar

 

     HOME   l  LA EMPRESA  l  PUNTOS DE VENTA  l  DONDE ESTAMOS  l  MAPA DEL SITIO  l CONTACTO

 

 

  

 

  

 

  

 

  

- FIJACIONES RAPIDAS MANUALES DESTACO

 - BALANCEADORES Y EQUILIBRADORES GRAVEDAD "0

- CLAMPS  HIDRAULICOS Y NEUMATICOS DESTACO

 - CILINDROS HIDRAULICOS HEAVY DUTY

- VENTOSAS  - GRIPPERS - ROBOTICA DESTACO

 - REMACHADORAS NEUMATICAS Y A BATERIA

- SISTEMA DE INDEXADO Y CONVEYORS DESTACO-CAMCO

 - BALANCEADORES Y EQUILIBRADORES GRAVEDAD "0

- INTENSIFICADORES DE PRESION SCANWILL

 - REMACHES POP Y TUERCAS REMACHABLES 

 
 
 

   Ud esta aquí: HOME > FIJACIONES DE-STA-CO  > CLAMPS NEUMATICOS STANDARD .... 

   

 

FIJACIONES  Y COMPONENTES
DE AUTOMACION
 

>Clamps Manuales De-Sta-Co

 

Manija Vertical

 

Manija Horizontal

 

Pistones Manuales

 

Lineales - Carrera Variable

 

Tiradores Tipo H y Tipo J

 

Pinzas Manuales-Autofijacion

 

Heavy Duty- Alta Precision

 

Carver Clamps

 

Accesorios para Clamps

 
 

>Clamps Neumáticos

 

Clamps Neumaticos Standard

 

Neumaticos c/giro (Swing Cylinders)

 

Neumaticos a Leva

 

Cilindros Doble Accion

 

Accesorios

   
 

> Power Clamps Neumaticos

 

82M-3E..Nuevo Modelo Global

 

Power Clamps con Brazo

 

Power Clamps Posicionadores

 
 

>Clamps Hidraulicos

 

Cilindros Cuerpo Roscado

 

Cilindros Swing-Pull (Con Giro)

 

Cilindros c/Piston Hueco

 

Power Clamps Hidraulicos

 

Bombas Hidraulicas / Boosters

   
 

>Grippers ROBOHAND

 

Grippers Paralelos (2 y 3 Jaws)

 

Grippers Angulares (2 y 3 Jaws)

 

Grippers Serie G100

 

Grippers para Chapa

 

Grippers Electricos

 

Actuadores Giratorios

 

Actuadores Deslizantes

 

Gripper Manipulador de Bolsas

   
 

>Ventosas y Vacío CPI

 

Ventosas Neumaticas

 

Ventosas  Magneticas

 

Ventosas c/Precarga a Resorte

 

Generador de Vacio Neumatico ARV

 

Generador de Vacio Electrico-Ecocup

 

Destacker Doble Blank c/Sensor

 

Manifolds en Bloque-Brida

   
 

>Automacion y Robotica

 

Cambiadores Automaticos

 

Cambiadores Manuales

 

Spyderip (Geometria Fija)

 

Round Tooling-Tubos-Accesorios

 

BodyBuilder-(Tubo Octogonal)

 

Adaptadores de Montaje

 

Linea Liviana p/Prensas-Accesorios

 

Dispositivos de Palletizado

 

Automacion-Guia de Aplicaciones

 

 

>Indexadores CAMCO

 

Indexadores Rotativos

 

Indexadores p/Lineas Continuas

 

Conveyors y Lineas Continuas

 

Embragues de Protecc. Sobrecarga

   
 

>Manipulacion a Distancia CRL

 

Telemanipuladores

 

Puertas Guante

 

Puertas de Transferencia "Clean"

 

Desechos de Residuos Toxicos

 
 
 

            -  CLAMPS NEUMATICOS STANDARD    -       

  8007 - Pneumatic Hold Down Clamp

This pneumatic clamp is designed for applications requiring higher clamping forces and longer cycle life. Built in flow control for smooth operation, magentic ring piston for position sensing. Accomodates T-slot (8EA-109-1) or round (810169) sensors.
  • Hardened pivots pins and bushings for long life
  • Solid clamping arm for may be modified to suit application requirements
  • Handle versions -EHL and -HER
  • G-1/8 ports are located at the rear of the cylinder
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
8007-E 2800 N
600 lbsf		 46 mm
1.80 in		 68 mm
2.68 in
8007-EHL 3700 N
830 lbsf		 35.2 mm
1.39 in		 68 mm
2.68 in
8007-EHR 3700 N
830 lbsf		 35.2 mm
1.39 in		 68 mm
2.68 in


 
  802 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 202-U. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • For light duty welding and assembly applications
  • Model 802-U has 1/8NPT ports
  • Model 802-UE has G-1/8 ports
  • Supplied with neoprene spindle

Especificaciones  

Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
802-U 890 N
200 lbsf		 27 mm
1.06 in		 44 mm
1.72 in
802-UE 890 N
200 lbsf		 27 mm
1.06 in		 44 mm
1.72 in

Precision Link Conveyors

 

 
  8021 - Pneumatic Hold Down Clamp

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1)
  • Model 8021 has 1/8NPT ports
  • Model 8021-UE has G-1/8 ports
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
8021 1735 N
390 lbsf		 40 mm
1.56 in		 57 mm
2.25 in
8021-UE 1735 N
390 lbsf		 40 mm
1.56 in		 57 mm
2.25 in

-- arriba  --
  807 - Pneumatic Hold Down Clamp  

Pneumatic version of our manual clamp models 207-U and 207-S. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Models 807-U and 807-S have 1/8NPT ports
  • Model 807-UE and 807-SE have G-1/8 ports
  • Supplied with flanged washers
  • Models 807-S, 807-SE supplied with bolt retainer
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
807-S 2224 N
500 lbsf		 35 mm
1.38 in		 80 mm
3.13 in
807-SE 2224 N
500 lbsf		 35 mm
1.38 in		 80 mm
3.13 in
807-U 1668 N
375 lbsf		 35 mm
1.38 in		 64 mm
2.50 in
807-UE 1668 N
375 lbsf		 35 mm
1.38 in		 64 mm
2.50 in
 
  8071 - Pneumatic Hold Down Clamp

Patented enclosed linkage makes clamp ideal for dirty environments such as welding and machining. Non-pivoting pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slo
  • Model 8071 has 1/8NPT ports
  • Model 8071-UE has G-1/8 ports
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
8071 2002 N
450 lbsf		 42 mm
1.66 in		 70 mm
2.75 in
8071-UE 2002 N
450 lbsf		 42 mm
1.66 in		 70 mm
2.75 in
 
  810 - Pneumatic Hold Down Clamp

 

 Pneumatic version of our manual clamp models 210-U and 210-S. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Models 810-U and 810-S have 1/8NPT ports
  • Model 810-UE and 810-SE have G-1/8 ports
  • 810-U, 810-UE supplied with flanged washers
  • Models 810-S, 810-SE supplied with bolt retainer
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
810-S 3400 N
750 lbsf		 46 mm
1.80 in		 90 mm
3.48 in
810-SE 3400 N
750 lbsf		 46 mm
1.80 in		 90 mm
3.48 in
810-U 2800 N
600 lbsf		 46 mm
1.80 in		 90 mm
3.58 in
810-UE 2800 N
600 lbsf		 46 mm
1.80 in		 90 mm
3.58 in
 
  812 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 201. Has built in flow restrictors
  • 150 lb. capacity
  • Double-acting pneumatic system required to operate
  • Available with magnetic ring for position sensing as an option. Switches are also available
  • Can be equipped with Viton seals for high temperature applications
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
812-U 450 N
150 lbsf		 17,5 mm
.69 in		 26 mm
1.02 in
 
  817 - Pneumatic Hold Down Clamp

Pneumatic version of manual clamp models 317-U and 317-S. Dual mounting surfaces for max flexibility. Built in flow control for smooth operation, magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Models 817-U and 817-S have 1/8NPT ports
  • Models 817-UE and 817-SE have G-1/8 ports
  • Models 817-U, 817-UE supplied with flanged washers
  • Models 817-S, 817-SE supplied with bolt retainer
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
817-S 1900 N
450 lbsf		 66 mm
2.68 in		 78 mm
3.06 in
817-SE 1900 N
450 lbsf		 66 mm
2.68 in		 78 mm
3.06 in
817-U 1700 N
350 lbsf		 66 mm
2.68 in		 62 mm
2.44 in
817-UE 1700 N
350 lbsf		 66 mm
2.68 in		 62 mm
2.44 in
 
 827 - Pneumatic Hold Down Clamp

Pneumatic version of clamp models 817-U and 817-S features dual mounting surfaces for maximum flexibility. Built-in flow control for smooth operation, magentic ring piston for position sensing. Accomodates T-slot (8EA-109-1) or round (810169) sensors.
  • Models 827-U and 827-S have 1/8NPT ports
  • Models 817-UE and 817-SE have G-1/8 ports
  • Models 827-U, 827-UE supplied with flanged washers
  • Models 827-S, 827-SE supplied with bolt retainer
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
827-S 5500 N
700 lbsf		 99,5 mm
3.88 in		 81 mm
3.19 in
827-SE 5500 N
700 lbsf		 99,5 mm
3.88 in		 81 mm
3.19 in
827-U 5500 N
600 lbsf		 99,5 mm
3.88 in		 83,4 mm
3.26 in
 
   847 - Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp models 247-U and 247-S. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Models 847-U and 847-S have 1/4NPT ports
  • Model 847-UE and 847-SE have G-1/4 ports
  • 847-U, 847-UE supplied with flanged washers
  • Models 847-S, 847-SE supplied with bolt retainer
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
847-S 4448 N
1000 lbsf		 57 mm
2.25 in		 123 mm
4.85 in
847-SE 4448 N
1000 lbsf		 57 mm
2.25 in		 123 mm
4.85 in
847-U 3559 N
800 lbsf		 57 mm
2.25 in		 123 mm
4.85 in
847-UE 3559 N
800 lbsf		 57 mm
2.25 in		 123 mm
4.85 in
 
 858- Pneumatic Hold Down Clamp

Pneumatic version of our manual clamp model 558. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Model 858 has 1/4NPT ports
  • Model 858-E has G-1/4 ports
  • Hardended pins and bushing for long life
  • Large, solid clamping arm can be modified to suit application requirements
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
858 15000 N
4000 lbsf		 98 mm
3.84 in		 122 mm
4.80 in
858-E 15000 N
4000 lbsf		 98 mm
3.84 in		 122 mm
4.80 in
 
 868- Pneumatic Hold Down Clamp

Larger version of model 827. Mounts perpendicular to the clamping surface. Features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Model 868 has 1/4NPT ports
  • Model 868-E has G-1/4 ports
  • Hardended pins and bushing for long life
  • Large, solid clamping arm can be modified to suit application requirements
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
868 16000 N
4000 lbsf		 110 mm
4.19 in		 121 mm
4.69 in
868-E 16000 N
4000 lbsf		 110 mm
4.19 in		 121 mm
4.69 in
 
 870 / 871-2 - Pneumatic Hold Down Clamp

 

 Clamp is able to accommodate inconsistent workpiece thicknesses, up to 0.18 in.
  • Especificaciones  
Part Number Holding Capacity Height Under Clamp Arm Clamp Arm Length
870-2 112 deg
- -		 260 Nm
192 ft-lb		 60 Nm
44 ft-lb
871-2 118 deg
- -		 260 Nm
192 ft-lb		 60 Nm
44 ft-lb
 

Pneumatic Straight Line Clamps
 803 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 603. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Model 803 has 1/8NPT ports and 5/16-18 tapped plunger
  • Model 8803-ME has G-1/8 ports and M8 tapped plunger
  • Especificaciones  
Part Number Holding Capacity Plunger Travel Plunger Height
803 2669 N
600 lbsf		 19 mm
.75 in		 28 mm
1.09 in
803-ME 2669 N
600 lbsf		 19 mm
.75 in		 28 mm
1.09 in

 

  
 830 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 630. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Model 830 has 1/8NPT ports and 5/16-18 tapped plunger
  • Model 830-ME has G-1/8 ports and M8 tapped plunger
  • Especificaciones  
Part Number Holding Capacity Plunger Travel Plunger Height
830 11120 N
2500 lbsf		 31.8 mm
1.25 in		 26.9 mm
1.06 in
830-ME 11120 N
2500 lbsf		 31.8 mm
1.25 in		 26.9 mm
1.06 in
 
 850 - Pneumatic Straight Line Clamp

Pneumatic version of our manual clamp model 650. Pneumatic cylinder features built in flow control for smooth operation and magentic ring piston for position sensing. Accomodates either T-slot (8EA-109-1) or round (810169) sensors.
  • Model 850 has 1/4NPT ports and 5/8-11 tapped plunger
  • Model 850-ME has G-1/4 ports and M16 tapped plunger
  • Hardended pins and bushing for long life
  • Especificaciones  
Part Number Holding Capacity Plunger Travel Plunger Height
850 71000 N
16000 lbsf		 50.8 mm
2.00 in		 66.8 mm
2.63 in
850-ME 71000 N
16000 lbsf		 50.8 mm
2.00 in		 66.8 mm
2.63 in
 
 800 / 1200 50 - Pneumatic Retractor Clamp

Low profile pneumatic retractor clamp. Arm moves straight forward and then pivots down to clamp workpiece.
  • 550 - 1600 lb. Exerting force capability
  • Single-acting pneumatic system required to operate
  • Compact size and low profile
  • Extended arm option available
  • Especificaciones  
Part Number Holding Capacity Clamping Range Arm Stroke
1200 750~1600 lbf
3340~7120N		 6.4 mm
0.25 in		 25.4 mm
1.00 in
1200-E 550~1200 lbf
2450~5340N		 9.7 mm
0.38 in		 25.4 mm
1.00 in
800 850~1500 lbf
3780~6670N		 2.3 mm
0.9 in		 12.7 mm
0.50 in
800-E 650~1200 lbf
890~5340N		 4.1 mm
0.16 in		 12.7 mm
0.50 in
      
 
 

 anterior | arriba | proxima
       
           

- PRODUCTOS
- Clamps DeStaCo Industries
- Clamps Manuales DeStaCo
- Clamps Neumaticos DeStaCo
- Clamps Hidraulidos DeStaCo
- Indexadores Camco Ferguson
- Componentes de automacion
   CPI - ROBOHAND - CCMOP
- Manipuladores a Distancia CRL


- Balanceadores Carl Sthal Kromer
- Remachadoras POP-AVDEL
- Esferas patrón para calibracion
- Insertos roscados remachables
- Remaches tipo POP
- Niveladores neumaticos Bilz
- Cilindros Hidraulicos ENERGY Mfg
- Sistemas de Suspencion y
  Movimiento de Cargas NORDGREIF

- RECURSOS                      

- Distribuidores
- Catalogo en PDF
- Archivos CAD
 

- INSTITUCIONAL
- La Empresa
- Donde estamos...
- Marcas Comercializadas
- Distribuidores                     
- Mapa del Sitio
- Contacto

Fix Tools SRL.
Av. LOPE DE VEGA 845-A
1407-Ciudad Autónoma de Buenos Aires.
Argentina

 

+54 911 39100307  Telefono y Whatsapp
 54 11 32214302      
 ventas@fixtools.com


Actualización:2024

Fix Tools SRL. - 2024