011-32214302

     HOME   l  LA EMPRESA  l  PUNTOS DE VENTA  l  DONDE ESTAMOS  l  MAPA DEL SITIO  l CONTACTO

 

FIJACIONES RAPIDAS MANUALES

CLAMPS  HIDRAULICOS Y NEUMATICOS

REMACHADORAS NEUMATICAS

BALANCEADORES GRAVEDAD "0"

VENTOSAS  - GRIPPERS - ROBOTICA

CILINDROS HIDRAULICOS HEAVY DUTY

SISTEMAS DE INDEXADO - CONVEYORS

www.facebook.com/fixtools                                                                                                                                           

 
 

Ud esta aquí: HOME > FIJACIONES DE-STA-CO > CLAMPS HORIZONTALES ...

   

 

 

>Clamps Manuales De-Sta-Co

 

Manija Vertical

 

Manija Horizontal

 

Pistones Manuales

 

Lineales - Carrera Variable

 

Tiradores Tipo H y Tipo J

 

Pinzas Manuales-Autofijacion

 

Heavy Duty- Alta Precision

 

Carver Clamps

 

Accesorios para Clamps

 
 

>Clamps Neumáticos

 

Clamps Neumaticos Standard

 

Neumaticos c/giro (Swing Cylinders)

 

Neumaticos a Leva

 

Cilindros Doble Accion

 

Accesorios

   
 

> Power Clamps Neumaticos

 

82M-3E..Nuevo Modelo Global

 

Power Clamps con Brazo

 

Power Clamps Posicionadores

 
 

>Clamps Hidraulicos

 

Cilindros Cuerpo Roscado

 

Cilindros Swing-Pull (Con Giro)

 

Cilindros c/Piston Hueco

 

Power Clamps Hidraulicos

 

Bombas Hidraulicas / Boosters

   
 

>Grippers ROBOHAND

 

Grippers Paralelos (2 y 3 Jaws)

 

Grippers Angulares (2 y 3 Jaws)

 

Grippers Serie G100

 

Grippers para Chapa

 

Grippers Electricos

 

Actuadores Giratorios

 

Actuadores Deslizantes

 

Gripper Manipulador de Bolsas

   
 

>Ventosas y Vacío CPI

 

Ventosas Neumaticas

 

Ventosas  Magneticas

 

Ventosas c/Precarga a Resorte

 

Generador de Vacio Neumatico ARV

 

Generador de Vacio Electrico-Ecocup

 

Destacker Doble Blank c/Sensor

 

Manifolds en Bloque-Brida

   
 

>Automacion y Robotica

 

Cambiadores Automaticos

 

Cambiadores Manuales

 

Spyderip (Geometria Fija)

 

Round Tooling-Tubos-Accesorios

 

BodyBuilder-(Tubo Octogonal)

 

Adaptadores de Montaje

 

Linea Liviana p/Prensas-Accesorios

 

Dispositivos de Palletizado

 

Automacion-Guia de Aplicaciones

 

 

>Indexadores CAMCO

 

Indexadores Rotativos

 

Indexadores p/Lineas Continuas

 

Conveyors y Lineas Continuas

 

Embragues de Protecc. Sobrecarga

   
 

>Manipulacion a Distancia CRL

 

Telemanipuladores

 

Puertas Guante

 

Puertas de Transferencia "Clean"

 

Desechos de Residuos Toxicos

 
 
 
 
   - CLAMPS HORIZONTALES - DE-STA-CO   - 
 
Standard Compactos Heavy Duty Acero
Inoxidable

  Standard Horizontal Clamps   

The outstanding characteristic of DE-STA-CO Horizontal Hold-Down Clamps is the low height design. Unlike the handle and the hold-down bar of the vertical clamps, those of the horizontal clamps move in opposite directions. Horizontal hold-down clamps are manufactured with solid or "U" shaped hold-down bars and with various mounting options.

Several horizontal hold-down clamps are also available in stainless steel for demanding environments such as food and chemical processing. Many models come equipped with DE-STA-CO® Toggle Lock Plus®, an innovative safety feature that adds a secondary lock to the clamp to help ensure that the over-center locking condition is maintained and protected against unintentional opening. Many DE-STA-CO® Toggle Lock Plus® models lock the clamp in the open position as well.

2013 - Horizontal Hold-Down Toggle Locking Clamp

Low silhouette hold down clamp features a handle that can be operated from either side or from behind
  • Up to 750 lb. Capacity
  • Supplied with neoprene spindle
  • Stainless steel models available
  • DE-STA-CO® Toggle Lock Plus® versions available
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm Length
2013-U 1310 N
295 lbsf
19.1 mm
0.75 in
41.9 mm
1.65 in
2013-UR 1310 N
295 lbsf
19.1 mm
0.75 in
41.9 mm
1.65 in

 

 2017 / 2027 - Horizontal Hold-Down Toggle Locking Clamp

New generation toggle clamp with over 2.5 times the capacity of our legacy items.

  • Flanged or straight base versions

  • Available with Toggle Lock Plus® feature

  • Adjustable pre-load

  • Large handle clearance

  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
2017-U 2490 N
560 lbsf
24.9 mm
0.98 in
64.3 mm
2.53 in
2017-UR 2490 N
560 lbsf
24.9 mm
0.98 in
64.3 mm
2.53 in
2027-U 3735 N
840 lbsf
33.5 mm
1.32 in
72.6 mm
2.86 in
2027-UR 3735 N
840 lbsf
33.5 mm
1.32 in
72.6 mm
2.86 in

  205 - Horizontal Hold-Down Toggle Locking Clamp

The smallest in our line of horizontal hold-down clamps.

  • All models supplied with neoprene spindle assembly.

  • Solid bar and U-bar options.

  • A variety of base options.

  • Stainless steel versions.

  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
205-S 265 N
60 lbsf
9.1 mm
0.36 in
22.4 mm
0.88 in
205-SB 265 N
60 lbsf
12.7 mm
0.5 in
17.4 mm
0.69 in
205-SL 265 N
60 lbsf
9.8 mm
0.39 in
22.4 mm
0.88 in
205-SR 265 N
60 lbsf
9.8 mm
0.39 in
22.4 mm
0.88 in
205-U 265 N
60 lbsf
8.1 mm
0.32 in
18.8 mm
0.74 in
205-UB 265 N
60 lbsf
11.2 mm
0.44 in
18.5 mm
0.73 in
205-UL 265 N
60 lbsf
8.1 mm
0.32 in
18.8 mm
0.74 in
205-UR 265 N
60 lbsf
8.1 mm
0.32 in
18.8 mm
0.74 in
 

 206 HSS - Horizontal Hold-Down Toggle Locking Clamp

Low profile clamp offers good clearance under the bar in a small package.
  • All models in stainless steel only.
  • Hex head spindle included.
  • Flanged and straight base versions.
  • Low-bar and high-bar versions.
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
206-HSS 445 N
100 lbsf
19.0 mm
.75 in
23.6 mm
.93 in
 

 213 - Horizontal Hold-Down Toggle Locking Clamp

Unique design gives greater hand clearance between the bar and handle. Models ending in "-L"" feature an open U-bar for attachments of arm extensions."
  • 150 lb.  Capacity
  • Clamp supplied with neoprene spindle
  • Stainless steel models available
  • Bar guide feature gives lateral support to the clamp bar.
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
213-U 665 N
150 lbsf
16.5 mm
0.65 in
36 mm
1.42 in
213-U-L 665 N
150 lbsf
16.5 mm
0.65 in
21.5 mm
0.85 in
213-UB 665 N
150 lbsf
19.6 mm
0.77 in
36 mm
1.42 in
213-UB-L 665 N
150 lbsf
19.6 mm
0.77 in
21.5 mm
0.85 in
 

215 - Horizontal Hold-Down Toggle Locking Clamp

Minimum overhead clearance is required for this low profile clamp.

  • 200 lb. capacity

  • Clamp supplied with neoprene spindle

  • Stainless steel models available

  • Straight base and solid bar models available

  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
215-S 890 N
200 lbsf
25.4 mm
1 in
58.2 mm
2.29 in
215-U 890 N
200 lbsf
25.4 mm
1 in
57.4 mm
2.26 in
215-UB 890 N
200 lbsf
29.2 mm
1.15 in
57.2 mm
2.25 in
 
 
 

 217 - Horizontal Hold-Down Toggle Locking Clamp

Unique design gives greater hand clearance between the bar and handle. Models ending in "-L"" feature an open U-bar for attachments of arm extensions."

  • 200 lb. Capacity

  • Clamp supplied with neoprene spindle

  • Stainless steel models available

  • Bar guide feature gives lateral support to the clamp bar

  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
217-U 890 N
200 lbsf
23.4 mm
0.92 in
58.7 mm
2.31 in
217-U-L 890 N
200 lbsf
23.4 mm
0.92 in
38 mm
1.49 in
217-UB 890 N
200 lbsf
28.2 mm
1.11 in
58.7 mm
2.31 in
217-UB-L 890 N
200 lbsf
28.2 mm
1.11 in
38 mm
1.49 in

 

 

  225 - Horizontal Hold-Down Toggle Locking Clamp

Minimum overhead clearance is required for this low profile clamp
  • 500 lb. capacity
  • Clamp supplied with neoprene spindle
  • Stainless steel and straight base models available
  • DE-STA-CO® Toggle Lock Plus® versions available
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
225-U 2225 N
500 lbsf
33.3 mm
1.31 in
68.3 mm
2.69 in
225-UB 2225 N
500 lbsf
39.6 mm
1.56 in
68.3 mm
2.69 in
225-UR 2225 N
500 lbsf
32.8 mm
1.29 in
68.3 mm
2.69 in
 

  227 - Horizontal Hold-Down Toggle Locking Clamp

Unique design gives greater hand clearance between the bar and handle. Models ending in "-L"" feature an open U-bar for attachments of arm extensions."
  • 500 lb. Capacity
  • Clamp supplied with neoprene spindle
  • Stainless steel models available
  • Bar guide feature gives lateral support to the clamp bar
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
227-U 2225 N
500 lbsf
31.8 mm
1.25 in
67.3 mm
2.65 in
227-U-L 2225 N
500 lbsf
31.8 mm
1.25 in
60.7 mm
2.39 in
227-UB 2225 N
500 lbsf
36.8 mm
1.45 in
67.3 mm
2.65 in
227-UB-L 2225 N
500 lbsf
36.8 mm
1.45 in
60.7 mm
2.39 in
 

  235 - Horizontal Hold-Down Toggle Locking Clamp

Minimum overhead clearance is required for this low profile clamp
  • 750 lb. capacity
  • Clamp supplied with neoprene spindle
  • Stainless steel and straight base models available
  • DE-STA-CO® Toggle Lock Plus® versions available
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
235-U 3335 N
750 lbsf
42.9 mm
1.69 in
105.9 mm
4.17 in
235-UB 3335 N
750 lbsf
53.1 mm
2.09 in
105.9 mm
4.17 in
235-UR 3335 N
750 lbsf
43.2 mm
1.7 in
105.7 mm
4.16 in
 

  237 - Horizontal Hold-Down Toggle Locking Clamp

Unique design gives greater hand clearance between the bar and handle.
  • 750 lb. Capacity
  • Clamp supplied with neoprene spindle
  • Stainless steel models available
  • Bar guide feature gives lateral support to the clamp bar
  • Especificaciones  
Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
237-U 3335 N
750 lbsf
42.3 mm
1.67 in
101.5 mm
4 in
 

  245 - Horizontal Hold-Down Toggle Locking Clamp

Unique design gives greater hand clearance between the bar and handle.
  • 1000 lb. Capacity
  • Clamp supplied with hex head spindle
  • Straight base and solid bar models available
  • Bar guide feature gives lateral support to the clamp bar

Especificaciones  

Modelo Holding
Capacity
Height
Under Bar
Clamp Arm
Length
245-U 4450 N
1000 lbsf
55.6 mm
2.19 in
124 mm
4.88 in
 
   
 
 

      

       
           

- PRODUCTOS
-
Clamps DeStaCo Industries
- Clamps Manuales DeStaCo
- Clamps Neumaticos DeStaCo
- Clamps Hidraulidos DeStaCo
- Indexadores Camco Ferguson
- Componentes de automacion
   CPI - ROBOHAND - CCMOP

- Manipuladores a Distancia CRL


-
Balanceadores Carl Sthal Kromer
-
Remachadoras POP-AVDEL
-
Esferas patrón para calibracion
-
Insertos roscados remachables
-
Remaches tipo POP
-
Niveladores neumaticos Bilz
-
Cilindros Hidraulicos ENERGY Mfg

- Sistemas de Suspencion y
  Movimiento de Cargas NORDGREIF

- RECURSOS                      
-
Novedades
-
Distribuidores
-
Catalogo en PDF
-
Archivos CAD
 

- INSTITUCIONAL
-
La Empresa
-
Donde estamos...
- Marcas Comercializadas
-
Distribuidores                     
-
Mapa del Sitio
-
Contacto

Fix Tools SRL.
Av. Angel Gallardo 616
Ciudad Autónoma de Buenos Aires.
Argentina

www.facebook.com/fixtools


- Email: ventas@fixtools.com.ar
- Skype: fijacionesfixtools
- Tel.   54 11 3221 4302
- Tel.   54 11 4981 5069
- Fax.  54 11 3221 2100 Ext. 4302

 

Fix Tools SRL. - Copyrigth 2016


 

Actualizacion: Julio 2016